IEC 62368-1 Annex C
ISO 179 Charpy impact tester , ISO 180 Izod impact Tester
Product Introduction
Digital Charpy/Izod Impact Tester is used to test the impact toughness of the non-metallic materials such as rigid plastic, reinforced nylon, glass fiber reinforced plastic, ceramics, cast stone, plastic appliance and insulation materials. It is widely used in the scientific research institutes, universities and chemical industry as the common quality test equipment.
Main Features
A. High-precision intelligent controller equipped with LCD display which you can read the data intuitively and accurately;
B. China's first carbon fiber lever (It has been patented); it succeeds in doing experiments without shaking involving the impact direction, improving the rigidity of materials, and concentrating impacting strength on the centroid of the pendulum, and using life increases.
C. Imported high-resolution digital encoders, higher and more stable angle measurement accuracy;
D. Aerodynamic impact hammer and imported ball bearings greatly reduce mechanical friction losses
E.Automatic calculation of the final result, 12 sets of the test data can be stored and averaged;
F. Optional interface of Chinese and English; units ( J / m, KJ / m2, kg-cm / cm, ft-ib / in )can be customized according to customers’ requirements.
G. Built-in mini printer to print the test data
Performance Standards
ISO179 Determination of Plastics - Hard Materials Charpy Impact Strength
ISO180 Determination of Plastics - Hard Materials Izod Impact Strength
GB/T1043—2008 (Rigid Plastic Charpy Impact Test Method)
JB/T8762—1998 (Plastics Charpy Impact Testing Machine)
GB/T 18743-2002(Charpy Impact Test Method for Fluid Transport Via Thermoplastic Pipe (Suitable for pipe pieces))
ASTM D256-2010
II.Main Parameters
| Item | Charpy Impact | Izod Impact |
| Pendulum energy | 1J,2J,4J,5J,7.5J,15J,25J,50J(The specific specifications of pendulum shall be based on the contract) | 2.75J,5.5J,11J,22J (The specific specifications of pendulum shall be based on the contract) |
| Pendulum angle | 150° |
| Impact speed | (2.9m/s,3.8m/s) | 3.5m/s |
| Impact center distance | 230mm,395mm | 335mm |
| blade angle | 30° | 70° |
| Blade filleted radius | R=2mm±0.5m | 0.8mm |
| Seat filleted radius | R=1m | |
| Blade front angle | 5° |
| Blade back angle | 10° |
| Sample type& dimension (L x W x T)mm3 | (ISO180-2000 or GB/T 1843-2008) Type-1:80×10×4 Type-2: 63.5×12.7×6.4 Type-3: 63.5×12.7×3.2 |
| Energy loss | 0.5J ≤4.0J 1.0J ≤2.0J 2.0J ≤1.0J ≥4.0J≤0.5J | 2.75J ≤0.06J 5.5J ≤0.12J 11J ≤0.24J |
| Pendulum torque | 2J=1.07180Nm 4J=2.14359Nm 5J=2.67949Nm 7.5J=4.01929Nm 15J=8.0385Nm 25J=13.3976Nm 50J=26.7952Nm | 2.75J=1.47372 N·m 5.5J=2.9474 N·m 11J=5.8949 22J=11.7897 |
If the value of pendulum nominal energy is not mensioned on table above, please calculate by following formula :
MN = EN/[1+sin(π/3)]≌0.535898EN
( MN:Pendulum torque(N·m) EN:endulum nominal energy(J))
Working Conditions:
● Temperature control range: 10℃～35℃
● Relative humidity 80%
● Device securely installed on a solid base, quality on the basis of quality of the pendulum should be at least 40 times, its level for 0.2:1000
● The environment without vibration, without corrosive medium, ● No strong electromagnetic interference.
III.Product Structure
1, the "controller": the instrument part of the operating system, touch-screen control.
2, "shield plate": prevent the impact after flying out of harm.
3, "printer": print results.
4, "power switch": controlling the electrical parts of the machine, main power switch, power on then connected.
5, "anchor": a device for supporting machine body.
6, "the pendulum weight": energy-producing device, formed by the impact edge and the weights can be chosen by energy, removable.
7, "start-impact button": releasing the electro-magnet
8, "shield": safty shield
9, "fixture ": clamping device
Product Tags:
|
|
IEC62368-1-Annex C Standards ISO 179 Charpy Impact Tester and ISO 180 Izod Impact Tester Testing Equipment Images
|
